Smart tariff automation can move flexible electricity use into cheaper hours, but the best results come from matching your tariff, appliance, device and safety rules. This guide shows how to estimate the possible saving, choose suitable equipment and build schedules that remain useful when your tariff or routine changes.
Overview
A time-of-use or flexible electricity tariff may charge different unit rates at different times. Your supplier, tariff terms, region, meter arrangement and contract determine the actual periods. Some tariffs use predictable off-peak windows; others may use prices that change more frequently or require an app, compatible charger, battery or energy platform.
Smart home automation in the UK can respond to these periods in several ways:
- Smart plugs: switch suitable plug-in loads on or off according to a schedule.
- Appliance timers: delay a washing machine, dishwasher or other appliance where the appliance is designed for unattended operation.
- Smart EV chargers: schedule charging around tariff periods, vehicle availability and a required departure time.
- Home batteries: charge or discharge according to configured price windows, solar generation and reserve settings.
- Energy platforms: combine meter data, tariff information and device controls, subject to compatibility and account permissions.
- Heating controls: adjust hot-water or heating routines, but only where the heating system, controls and comfort requirements support it.
The aim is not to automate every appliance. It is to identify loads that are flexible, measurable and safe to run without immediate supervision. A small number of well-chosen schedules is usually easier to check than a complicated system with many dependencies.
Which loads are suitable?
| Load or device | Potential approach | Important limitation |
|---|---|---|
| Washing machine or dishwasher | Use the appliance delay timer or a compatible smart plug | Confirm that the appliance can start safely after power is restored and that the cycle may run unattended |
| EV charging | Use the charger or vehicle's tariff-aware schedule | Check the required departure time, charging current and fallback behaviour if the app or internet is unavailable |
| Hot-water cylinder | Use existing heating controls or a properly installed controller | Do not improvise with a plug or switch; electrical work and system controls may require a qualified installer |
| Portable heater | Generally avoid unattended automated switching | High load, fire risk and manufacturer restrictions make this a poor candidate for casual smart-plug scheduling |
| Fridge or freezer | Do not schedule routinely | Interrupting power can affect food safety, temperature stability and appliance operation |
| Lighting and low-power electronics | Use schedules for convenience or standby reduction | The financial saving may be modest, so avoid buying equipment solely for a small expected saving |
How to estimate
Estimate the saving for each load rather than assuming that every off-peak run is worthwhile. Use the energy consumed, the difference between the two unit rates and the number of shifted runs.
Basic calculation:
Estimated saving per run = energy used in kWh × (normal unit rate − off-peak unit rate)
For a recurring schedule:
Estimated periodic saving = saving per run × shifted runs in the period
If you are comparing a device or subscription, include its cost:
Net saving = estimated energy saving − device, installation or subscription cost allocated to the same period
These calculations describe the energy charge only. They do not automatically include standing charges, export payments, battery losses, minimum charges, tariff conditions or changes in usage. A standing charge normally does not change simply because one appliance runs at a different time, so it should not be treated as a saving from shifting that appliance. Check your tariff documents before relying on this assumption.
Measure real consumption where possible. A plug-in energy monitor can help with suitable appliances, while an in-home display or whole-home monitor can show broader patterns. Do not use a plug-in monitor on a load that exceeds its rating, and do not open consumer units or alter fixed wiring to obtain measurements.
For a device with a constant or known power draw, you can estimate consumption with:
Energy used in kWh = power in watts × hours used ÷ 1,000
For appliances with heating elements, pumps or variable-speed motors, measured consumption is preferable because the label's maximum power is not necessarily the energy used during a complete cycle.
Inputs and assumptions
Record these inputs before creating an automation:
- Tariff periods: write down the exact start and end times, the unit rate for each period and whether the schedule changes by day, season or supplier instruction. Do not assume that a tariff advertised as off-peak has the same hours as another tariff.
- Actual energy use: measure a representative cycle or obtain data from the appliance, charger or energy monitor. Record the number of runs per week or month.
- Device capability: check whether the smart plug, timer, charger, battery or heating controller can schedule the action you need. Compatibility with Alexa, Google Home, Apple Home or Matter does not necessarily mean tariff-aware automation is supported.
- Fallback behaviour: decide what happens if Wi-Fi, the supplier service, the energy platform or the device account is unavailable. A schedule should fail safely and preserve essential heating, hot water and security functions.
- Comfort and availability: identify when laundry, hot water, vehicle charging or heating must be ready. A cheap period is not useful if it causes a missed journey, cold rooms or an appliance running when nobody can respond to a fault.
- Safety and electrical rating: check the appliance instructions and the smart device rating. A smart plug is not a substitute for a correctly installed high-load circuit, immersion-heater controller or EV charge point.
Keep an assumption log with the date, tariff name, rates, measured kWh, schedule and expected result. This makes it easier to spot whether a change in consumption, tariff timing or device behaviour caused a different bill.
For a wider view of consumption, see Smart Home Energy Monitoring UK: How to Track Electricity Use and Find Waste. If you are comparing heating controls, the guide to smart thermostats and radiator valves for UK homes can help separate tariff scheduling from room-by-room heating control.
Worked examples
The following examples use deliberately simple, illustrative assumptions. Replace every rate and usage figure with the values from your own tariff and measurements.
Example 1: shifting a dishwasher cycle
Assume a dishwasher uses 1.1 kWh per cycle, the normal unit rate is 30 pence per kWh and the off-peak rate is 15 pence per kWh. The difference is 15 pence per kWh.
1.1 × (£0.30 − £0.15) = £0.165
The estimated saving is 16.5 pence per shifted cycle. If the household safely shifts 12 cycles in a month, the illustrative energy saving is £1.98 before equipment costs and any change in usage. If the dishwasher cannot reliably restart after a power interruption, use its own delay-start function rather than cutting its supply with a smart plug.
Example 2: scheduling an EV charge
Assume a vehicle receives 24 kWh during a charge, with a normal rate of 28 pence per kWh and an off-peak rate of 12 pence per kWh. The simple difference is:
24 × (£0.28 − £0.12) = £3.84
This is a planning estimate, not a guaranteed bill saving. Charging losses, minimum charge levels, departure constraints and the charger's control settings may mean that the energy drawn from the supply differs from the energy stored in the battery. Set a ready-by time, verify that the charger has accepted the schedule and retain a manual start option for urgent journeys.
Example 3: deciding whether to buy a smart plug
Suppose a suitable appliance could save £2 per month through scheduling, while a compatible smart plug costs £18 and has no ongoing charge. The simple payback estimate is:
£18 ÷ £2 per month = 9 months
That result only matters if the appliance is safe to control, the schedule is used consistently and the plug remains compatible. If the same automation can be created using an existing appliance timer, the lowest-cost option may be the better choice. Also consider convenience, manual control, local operation and what happens when the internet is down.
When to recalculate
Revisit your estimate whenever an input changes, rather than leaving a schedule untouched indefinitely. Recalculate when your supplier changes the unit rates or time windows, when you move to a different tariff, when a smart meter or energy platform changes its data, or when an appliance is replaced.
Review at least once during a change in season. Heating, hot-water, laundry and vehicle routines can alter substantially between colder and warmer months. Solar generation, a home battery or an EV may also change the best use of electricity: consuming at a cheap period is not automatically preferable if another option has a different value or constraint.
At each monthly or billing-cycle review:
- compare scheduled consumption with actual meter or device data;
- check that the tariff times still match the automation;
- look for missed, duplicated or unexpectedly early runs;
- confirm that manual overrides still work;
- inspect smart-plug cables, chargers and adapters for heat or damage;
- remove schedules for appliances that are no longer used; and
- update the calculation with current measured kWh and rates.
Keep essential heating, hot water, refrigeration and safety systems outside experimental automations unless the control method is designed for them. For installation or fixed-wiring work, compare qualified professionals through a local smart home or electrical installation service rather than adapting a plug-in solution. See Smart Home Installation Cost UK for questions to ask before requesting quotes.
A sensible starting workflow is simple: copy the tariff periods, measure one flexible appliance, calculate the difference, create one schedule, test the manual override and review the result after a complete billing period. Expand only when the first automation is predictable, safe and genuinely useful.